Vpn Client 64 Bit

Private Internet Access is the leading VPN Service provider specializing in secure, encrypted VPN tunnels which create several layers of privacy and security providing you safety on the internet. Our service is backed by multiple gateways worldwide with access in 78+ countries, 101+ regions.

• Cisco Vpn Client 64-bit
• Kerio Vpn Client 64-bit Download
• Kerio Vpn Client 64-bit Download
• Download Sonicwall Global Vpn Client 64-bit
• Sonicwall Vpn Client 64-bit
• Download Sonicwall Vpn Client 64-bit

• SonicWALL Global VPN Client comes as either a 32-bit or 64-bit setup file which should correspond to your version of Windows. SonicWALL Global VPN 4.10.2.0428 on 32-bit and 64-bit PCs. This download is licensed as freeware for the Windows (32-bit and 64-bit) operating system on a laptop or desktop PC from network software without restrictions.
• The cat's out of the bag! In October 2020, Cisco announced the Next Generation of Enterprising Routing Platforms: the Catalyst 8000 Edge Platforms Family including the Catalyst 8200, Catalyst 8300, Catalyst 8500, and Catalyst 8000V.
• Cisco's popular VPN Client for 64Bit Windows operating systems. VPN Client version: 5.0.07.0.440-k9 Useful Cisco VPN related articles Windows 7.

As part of its ongoing cybersecurity strategy, The Division of Information Technology has implemented a mandatory two-factor authentication for the Enterprise Virtual Private Network (VPN)

To increase security measures on your account, two-factor authentication requires two steps to log in. The first step is using something you know (i.e., your password), and the second step is something you have (i.e., cell phone) to securely verify your identity.

• Enroll your phone for two-factor
• Cisco AnyConnect client

AnyConnect

FIU implements the AnyConnect VPN client to allow FIU users to connect on and off campus to the FIU network through a Secure Socket Layer (SSL) protocol.

• Supported Operating Systems
• System Requirements
• AnyConnect Clients
• Installing the AnyConnect

Supported Operating Systems

Microsoft Windows

• Windows 10 (32-bit and 64-bit)
• Windows 8, 8.1 (32-bit and 64-bit)
• Windows 7 (32-bit and 64-bit)

MAC OS X

• Mac OS X 10.11, 10.12, 10.13, 10.14 x86 (32-bit) or x64 (64-bit)
• Mac OS X versions 10.10 and lower are no longer supported

Linux

• Linux
• Red Hat Enterprise Linux 6.x and 7.x (64-bit)
• Ubuntu 14.04 (LTS), 16.04 (LTS), and 18.04 (LTS) (64-bit only)

System Requirements

Microsoft Windows

• Pentium class processor or greater.
• 100 MB hard disk space.
• Microsoft Installer, version 3.1.

MAC OS X

• 50MB of hard disk space.
• To operate correctly with Mac OS X, AnyConnect requires a minimum display resolution of 1024 by 640 pixels.

Linux

• x86 instruction set.
• 32-bit or 64-bit processor.
• 32 MB RAM.
• 20 MB hard disk space.
• Superuser privileges are required for installation.
• libstdc++ users must have libstdc++.so.6(GLIBCXX_3.4) or higher, but below version 4.

AnyConnect Clients

MAC OS X

• Intel download 4.9.X

AnyConnect Secure Mobility Client for Android Devices

All Android AnyConnect packages are available for installation and upgrade from the Google Play Store

For additional information regarding supported Android devices, please visit Cisco's support documentation

AnyConnect Secure Mobility Client for Apple Devices

All Apple AnyConnect packages are available for installation and upgrade from the Apple App Store

For additional information regarding supported Apple devices, please visit Cisco's support documentation

TwoFactor

Enroll

In order to verify your identity, you will be required to enroll your phone (“something you have”) in FIU’s two-factor authentication system.

Please review these simple step-by-step instructions below to enroll your phone:

• Visit login.fiu.edu/enroll
• Log in using your FIU username and password
• When prompted, enter the phone number of the device you would like to enroll in two-factor authentication (FIU numbers will not be accepted).
• Specify what type of device corresponds to the enrolled number
• When prompted, enter the code you received
• You are now enrolled in two-factor authentication

TwoFactor with VPN

Launch your Cisco AnyConnect VPN client, you will be prompted for your FIU username, password, and a “second password”. In this second password field, you will specify your preferred verification method (“something you have”).

In the second password field, you will be required to type “push”, “phone”, or “sms”.

• Push: uses the DUO Mobile app *
• Phone: places an automated voice call *
• SMS: sends unique verification codes via text messages **

(*Note: Your carrier’s data and message rates may apply)

(**Note: Your carrier’s data and message rates may apply, 10 codes are sent in one text message to use 10 different times.)

FAQs

Cisco Vpn Client 64-bit

VPN client configuration files are contained in a zip file. Configuration files provide the settings required for a native Windows, Mac IKEv2 VPN, or Linux clients to connect to a virtual network over Point-to-Site connections that use native Azure certificate authentication.

Client configuration files are specific to the VPN configuration for the virtual network. If there are any changes to the Point-to-Site VPN configuration after you generate the VPN client configuration files, such as the VPN protocol type or authentication type, be sure to generate new VPN client configuration files for your user devices.

• For more information about Point-to-Site connections, see About Point-to-Site VPN.
• For OpenVPN instructions, see Configure OpenVPN for P2S and Configure OpenVPN clients.

Important

Starting July 1, 2018, support is being removed for TLS 1.0 and 1.1 from Azure VPN Gateway. VPN Gateway will support only TLS 1.2. Only point-to-site connections are impacted; site-to-site connections will not be affected. If you’re using TLS for point-to-site VPNs on Windows 10 clients, you don’t need to take any action. If you are using TLS for point-to-site connections on Windows 7 and Windows 8 clients, see the VPN Gateway FAQ for update instructions.

Generate VPN client configuration files

Before you begin, make sure that all connecting users have a valid certificate installed on the user's device. For more information about installing a client certificate, see Install a client certificate.

You can generate client configuration files using PowerShell, or by using the Azure portal. Either method returns the same zip file. Unzip the file to view the following folders:

• WindowsAmd64 and WindowsX86, which contain the Windows 32-bit and 64-bit installer packages, respectively. The WindowsAmd64 installer package is for all supported 64-bit Windows clients, not just Amd.
• Generic, which contains general information used to create your own VPN client configuration. The Generic folder is provided if IKEv2 or SSTP+IKEv2 was configured on the gateway. If only SSTP is configured, then the Generic folder is not present.

Generate files using the Azure portal

1. In the Azure portal, navigate to the virtual network gateway for the virtual network that you want to connect to.

2. On the virtual network gateway page, select Point-to-site configuration.

3. At the top of the Point-to-site configuration page, select Download VPN client. It takes a few minutes for the client configuration package to generate.

4. Your browser indicates that a client configuration zip file is available. It is named the same name as your gateway. Unzip the file to view the folders.

Generate files using PowerShell

1. When generating VPN client configuration files, the value for '-AuthenticationMethod' is 'EapTls'. Generate the VPN client configuration files using the following command:

2. Copy the URL to your browser to download the zip file, then unzip the file to view the folders.

Windows

You can use the same VPN client configuration package on each Windows client computer, as long as the version matches the architecture for the client. For the list of client operating systems that are supported, see the Point-to-Site section of the VPN Gateway FAQ.

Note

You must have Administrator rights on the Windows client computer from which you want to connect.

Use the following steps to configure the native Windows VPN client for certificate authentication:

1. Select the VPN client configuration files that correspond to the architecture of the Windows computer. For a 64-bit processor architecture, choose the 'VpnClientSetupAmd64' installer package. For a 32-bit processor architecture, choose the 'VpnClientSetupX86' installer package.
2. Double-click the package to install it. If you see a SmartScreen popup, click More info, then Run anyway.
3. On the client computer, navigate to Network Settings and click VPN. The VPN connection shows the name of the virtual network that it connects to.
4. Before you attempt to connect, verify that you have installed a client certificate on the client computer. A client certificate is required for authentication when using the native Azure certificate authentication type.

Mac (OS X)

You have to manually configure the native IKEv2 VPN client on every Mac that will connect to Azure. Azure does not provide mobileconfig file for native Azure certificate authentication. The Generic contains all of the information that you need for configuration. If you don't see the Generic folder in your download, it's likely that IKEv2 was not selected as a tunnel type. Note that the VPN gateway Basic SKU does not support IKEv2. Once IKEv2 is selected, generate the zip file again to retrieve the Generic folder.
The Generic folder contains the following files:

• VpnSettings.xml, which contains important settings like server address and tunnel type.
• VpnServerRoot.cer, which contains the root certificate required to validate the Azure VPN Gateway during P2S connection setup.

Use the following steps to configure the native VPN client on Mac for certificate authentication. You have to complete these steps on every Mac that will connect to Azure:

1. Import the VpnServerRoot root certificate to your Mac. This can be done by copying the file over to your Mac and double-clicking on it. Select Add to import.

   Note

   Double-clicking on the certificate may not display the Add dialog, but the certificate is installed in the correct store. You can check for the certificate in the login keychain under the certificates category.

2. Verify that you have installed a client certificate that was issued by the root certificate that you uploaded to Azure when you configured you P2S settings. This is different from the VPNServerRoot that you installed in the previous step. The client certificate is used for authentication and is required. For more information about generating certificates, see Generate Certificates. For information about how to install a client certificate, see Install a client certificate.

3. Open the Network dialog under Network Preferences and select '+' to create a new VPN client connection profile for a P2S connection to the Azure virtual network.

   The Interface value is 'VPN' and VPN Type value is 'IKEv2'. Specify a name for the profile in the Service Name field, then select Create to create the VPN client connection profile.

4. In the Generic folder, from the VpnSettings.xml file, copy the VpnServer tag value. Paste this value in the Server Address and Remote ID fields of the profile.

5. Select Authentication Settings and select Certificate. For Catalina, select None, and then certificate.

   For Catalina, select None and then Certificate. Select the correct certificate:

6. Click Select… to choose the client certificate that you want to use for authentication. This is the certificate that you installed in Step 2.

7. Choose An Identity displays a list of certificates for you to choose from. Select the proper certificate, then select Continue.

8. In the Local ID field, specify the name of the certificate (from Step 6). In this example, it is ikev2Client.com. Then, select Apply to save the changes.

9. On the Network dialog, select Apply to save all changes. Then, select Connect to start the P2S connection to the Azure virtual network.

Linux (strongSwan GUI)

Install strongSwan

The following configuration was used for the steps below:

• Computer: Ubuntu Server 18.04
• Dependencies: strongSwan

Use the following commands to install the required strongSwan configuration:

Use the following command to install the Azure command-line interface:

Generate certificates

If you have not already generated certificates, use the following steps:

Generate the CA certificate.

Print the CA certificate in base64 format. This is the format that is supported by Azure. You upload this certificate to Azure as part of the P2S configuration steps.

Generate the user certificate.

Kerio Vpn Client 64-bit Download

Generate a p12 bundle containing the user certificate. This bundle will be used in the next steps when working with the client configuration files.

Install and configure

The following instructions were created on Ubuntu 18.0.4. Ubuntu 16.0.10 does not support strongSwan GUI. If you want to use Ubuntu 16.0.10, you will have to use the command line. The examples below may not match screens that you see, depending on your version of Linux and strongSwan.

1. Open the Terminal to install strongSwan and its Network Manager by running the command in the example.

2. Select Settings, then select Network. Select the + button to create a new connection.

3. Select IPsec/IKEv2 (strongSwan) from the menu, and double-click.

4. On the Add VPN page, add a name for your VPN connection.

5. Open the VpnSettings.xml file from the Generic folder contained in the downloaded client configuration files. Find the tag called VpnServer and copy the name, beginning with 'azuregateway' and ending with '.cloudapp.net'.

6. Paste the name in the Address field of your new VPN connection in the Gateway section. Next, select the folder icon at the end of the Certificate field, browse to the Generic folder, and select the VpnServerRoot file.

7. In the Client section of the connection, for Authentication, select Certificate/private key. For Certificate and Private key, choose the certificate and the private key that were created earlier. In Options, select Request an inner IP address. Then, select Add.

8. Turn the connection On.

Linux (strongSwan CLI)

Install strongSwan

The following configuration was used for the steps below:

• Computer: Ubuntu Server 18.04
• Dependencies: strongSwan

Use the following commands to install the required strongSwan configuration:

Use the following command to install the Azure command-line interface:

Generate certificates

If you have not already generated certificates, use the following steps:

Generate the CA certificate.

Print the CA certificate in base64 format. This is the format that is supported by Azure. You upload this certificate to Azure as part of the P2S configuration steps.

Generate the user certificate.

Generate a p12 bundle containing the user certificate. This bundle will be used in the next steps when working with the client configuration files.

Kerio Vpn Client 64-bit Download

Install and configure

1. Download the VPNClient package from Azure portal.

2. Extract the file.

3. From the Generic folder, copy or move the VpnServerRoot.cer to /etc/ipsec.d/cacerts.

4. Copy or move cp client.p12 to /etc/ipsec.d/private/. This file is the client certificate for the VPN gateway.

5. Open the VpnSettings.xml file and copy the <VpnServer> value. You will use this value in the next step.

6. Adjust the values in the example below, then add the example to the /etc/ipsec.conf configuration.

7. Add the following values to /etc/ipsec.secrets.

8. Run the following commands:

Download Sonicwall Global Vpn Client 64-bit

Next steps

Sonicwall Vpn Client 64-bit

Return to the original article that you were working from, then complete your P2S configuration.

Download Sonicwall Vpn Client 64-bit

• PowerShell configuration steps.
• Azure portal configuration steps.